COOLING TOWER REPLACEMENT PARTS
For Parts Call CTM Today: John Tabanao at 1 800 311-12001 800 311-1200 ext 107
TYPICAL TOWER CONFIGURATION
a link below to view information on a Replacement Part.
R-130 SPRAY SYSTEM
MAINTENANCE FREE - OPTIMUM TOWER PERFORMANCE
The new spray system has several unique features which enables optimum tower performance at all times, with minimal maintenance. The most important feature is a dramatic reduction in the number of nozzles. If you retrofit a 1000 ton tower built before 1976, an R130 system requires only 30 nozzles compared to 1000 on the original tower. A 1000 ton tower built after 1976 has 200 nozzles which will again be reduced to 30 R130 nozzles.
BLADE TYPE ELIMINATORS
This durable inexpensive blade, PVC eliminator replaces wood or asbestos eliminators.
CELLULAR TYPE ELIMINATORS
The cellular PVC drift eliminators are stronger & more efficient than the blade type eliminator.
PVC FILL MEDIA
This state-of-the-art, high efficiency PVC honeycomb fill replaces obsolete & inefficient corrugated steel fill, MNA asbestos fill & wooden lath splash fill.
CELLULAR INLET REMOVERS
Replaces obsolete & hazardous asbestos cement louvers & plywood louvers.
DRIVE FAN SHAFTS
The new non corrosive composite graphite
drive shafts are stronger & lighter for
longer life & performance. Also available
hollow tube & solid fan shafts in mild steel
or s/steel for cooling towers, closed circuit coolers & air handling units.
FAN BLADES & HUBS
TUF-LITE® FIBERGLASS COOLING TOWER FANS
Tuf-Lite® fans are constructed of light weight corrosion resistant, fiberglass reinforced vinyl ester or epoxy resins. Tuf-lite II® are available in adjustable pitch or energy saving Auto Variable® pitch hubs, for new applications or retrofit existing.
Heavy duty fan wheels for all makes & models of cooling towers, closed circuit coolers & air handling units.
FAN CLAMPS & BALANCING CLIPS: Complete range of fan clamps & balancing clips are in stock for all fan wheels & balancing requirements.
SAFETY LADDERS PLATFORMS & HANDRAILS
Safety regulations require access ladders, safety cages, perimeter handrails & walkways as per Ontario Ministry of Labour Bill 208 standards. All in stock & available for immediate installation & hot dipped galvanized after fabrication.
New & rebuilt with complete warranties, for all makes of cooling towers. Gear Reducer parts, lubrication and accessories available. A complete range of half couplings, neoprene bushings, boston couplings are available in stock.
MOTORS - NEW & REBUILT
Cooling tower motors operate in hars conditions. Windings must be triple dipped & baked. Customized drain holes & seals required on motors in discharge air streams. All motors have full warranties.
Split sleeve & solid sleeve bearings pillow block & flange mounted bearings are in stock at ALL times for all makes & models of towers & air handling units.
Stainless steel & hot dipped galvanized hardware, pre-pressure treated marine grade plywood & quality grade lumber. Polyurethane caulking & sealants. Two part solvent free polymeric coating system for cooling tower interiors & air handling units.
ALL IN STOCK.
FIRE RETARDANT FIBERGLASS
FIBERGLASS CASING & LOUVERS: Fire retardant fiberglass casing, corner rolls, access doors & louvers (8oz, 12oz, 16oz & 24oz) all colours available.
FLOAT VALVES & FLOATS
Heavy duty float valves complete with aluminum bar and stainless steel adapter for convenient lateral and vertical adjustment.
SIDE STREAM FILTRATION
Provides continuous filtering of cooling or process waters to remove suspended solids such as airborne silt, sand organic matter, as well as waterborne contaminant's such as scale & corrosion products, microbiological & other organic matter.
Cold water basin immersion heaters, automatic level controls. Variable frequency drives. Two speed motor control panels, slow closing solenoid valves. Anti-vibration limit switches.
Larger than existing heavy,
steel, circular doors
Greater access for maintenance or emergencies
NEW! CTM SAFETY ACCESS DOORS
Non-Corrosive Access Doors Designed With Operator Safety in Mind!
Optimally Sized to Suit Each Cooling Tower Installation!
Exclusively from CTM!
- CTM Safety Access Doors promote operator safety and save maintenance dollars into the bargain!
- CTM Safety Access Doors are larger than present 17" or 22" circular steel doors, are non-corrosive, optimally sized to suit each cooling tower and easily retro-fitted into existing large and small tower installations.
- CTM Safety Access Doors promote full and safe access to the cold water basin for cleaning and maintenance - often without the need to actually enter the tower!
- Adding two CTM Safety Access Doors on larger forced draft towers will allow easy access for maintenance crew and allow safe extraction of personnel in the event of an emergency.
- "Awkward and dangerous access to the cold water basin is a thing of the past with CTM Safety Access Doors."
Call CTM Today:
1 800 311-1200 ext 107